Huawei SUN2000-3KTL-L1 User Manual

6 System Commissioning
D ANGER
● Wear insulated gloves and use insulated tools to prevent electric shocks or
short circuits.
6.1 Verication Before Power-On
Table 6-1 Check items and acceptance criteria
No.
Check Item Acceptance Criteria
1 SUN2000 The SUN2000 is installed correctly and
securely.
2 WLAN antenna The WLAN antenna is installed
correctly and securely.
3 Cables routing Cables are routed properly as required
by the customer.
4 Cable tie Cable ties are evenly distributed and no
burr exists.
5 Grounding The PE cable is connected correctly,
securely, and reliably.
6 Switch The DC switch and all the switches
connecting to the SUN2000 are OFF.
7 Cable connection The AC output power cable, DC input
power cable, battery cable, and signal
cable are connected correctly, securely,
and reliably.
8 Unused terminal and port Unused terminals and ports are locked
by watertight caps.
SUN2000-(2KTL-6KTL)-L1
User Manual 6 System Commissioning
Issue 10 (2023-02-13) Copyright © Huawei Technologies Co., Ltd. 65

Huawei SUN2000-3KTL-L1 Specifications

General

Max. efficiency	98.4%
Max. input voltage	600 V
Nominal output power	3000 W
Dimensions (W x H x D)	365 x 365 x 156 mm
Operating temperature range	-25°C to +60°C
Nominal AC voltage	220 V / 230 V / 240 V
MPPT voltage range	90 V - 560 V
Rated input voltage	360 V
Number of MPPTs	2
Cooling	Natural Convection
Protection degree	IP65
Rated output voltage	220 V / 230 V / 240 V
Output frequency	50 Hz / 60 Hz
Power factor	0.8 leading ... 0.8 lagging
THDi	<3%
Efficiency	98.4%
Warranty	10 years
Max. apparent AC power	3300 VA
Max. output power	3300 W