Huawei SUN2000-3KTL-L1 User Manual

Table 7-5 DRM requirements
Mode Port on the SUN2000 Requirements
DRM0 DI1 and GND of the COM
port
● When switches S0 and S9 are
switched on, the solar inverter
should be turned o.
● When switch S0 is switched
o, and switch S9 is switched
on, the solar inverter should
be grid-tied.
Procedure
Step 1 On the home page, choose Settings > Feature parameters.
Step 2 Set DRM to .
Figure 7-19 DRM
----End
SUN2000-(2KTL-6KTL)-L1
User Manual 7 Man-Machine Interaction
Issue 10 (2023-02-13) Copyright © Huawei Technologies Co., Ltd. 87

Huawei SUN2000-3KTL-L1 Specifications

General

Max. efficiency	98.4%
Max. input voltage	600 V
Nominal output power	3000 W
Dimensions (W x H x D)	365 x 365 x 156 mm
Operating temperature range	-25°C to +60°C
Nominal AC voltage	220 V / 230 V / 240 V
MPPT voltage range	90 V - 560 V
Rated input voltage	360 V
Number of MPPTs	2
Cooling	Natural Convection
Protection degree	IP65
Rated output voltage	220 V / 230 V / 240 V
Output frequency	50 Hz / 60 Hz
Power factor	0.8 leading ... 0.8 lagging
THDi	<3%
Efficiency	98.4%
Warranty	10 years
Max. apparent AC power	3300 VA
Max. output power	3300 W