Huawei SUN2000L - Page 103

SUN2000L-(2KTL-5KTL)
User Manual
7 Operations on the Local FusionHome App
Issue 02 (2017-12-12)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
96
Figure 7-40 Feature parameters
The feature parameter values vary with the grid code. The displayed values prevail.
Table 7-10 Description of feature parameters
Parameter
Description
Value Range
MPPT multi-peak scanning
When the SUN2000L is
used in scenarios where PV
strings are obviously
shaded, enable this function.
Then the SUN2000L will
perform MPPT scanning for
all PV strings at regular
intervals to locate the
maximum power.
The scan interval is
specified by MPPT
multi-peak scan interval.

Disable

Enable
MPPT multi-peak scan
interval (min)
Specifies the MPPT
multi-peak scanning
interval.
This parameter is displayed
only when MPPT
multi-peak scanning is set
to Enable.
[5, 30]