Huawei SUN2000L - Time Setting

SUN2000L-(2KTL-5KTL)
User Manual
7 Operations on the Local FusionHome App
Issue 02 (2017-12-12)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
103
Parameter
Description
Value Range
Reactive power change
gradient (%/s)
Adjusts the change speed of
the SUN2000L reactive
power.
[0.1, 1000]
Reactive power
compensation (PF)
Adjusts the SUN2000L
output power factor.
(–1, –0.8]U[0.8, 1]
Reactive power
compensation (Q/S)
Adjusts the SUN2000L
output reactive power.
[–0.6, 0.6]
Freq for triggering OF
derating (Hz)
For a specific grid code, the
SUN2000L output active
power needs to be derated
when the grid frequency
exceeds a specific value.

When the output
frequency is 50 Hz, the
value range is
45.00–55.00 Hz.

When the output
frequency is 60 Hz, the
value range is
55.00–65.00 Hz.
Freq for exiting OF derating
(Hz)
Specifies the frequency
threshold for exiting
overfrequency derating.

When the output
frequency is 50 Hz, the
value range is
45.00–55.00 Hz.

When the output
frequency is 60 Hz, the
value range is
55.00–65.00 Hz.
Recovery grad of OF
derating (%/min)
Specifies the power
recovery gradient for
overfrequency derating.
[5, 20]
7.4.5.5 Time setting
To set time, choose Grid-connect config > Expert > Time setting from the Operation
console screen.