Huawei SUN2000L - Page 87

SUN2000L-(2KTL-5KTL)
User Manual
7 Operations on the Local FusionHome App
Issue 02 (2017-12-12)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
80
----End
Forced Charge/Discharge
Step 1 On the Operation console screen, choose Device maintenance > Energy control > Energy
storage control > Forced charge/discharge and perform the corresponding operation.
Figure 7-27 Forced charge/discharge
Table 7-5 Description of forced charge/discharge parameters
Parameter
Description
Value Range
Charge/discharge power
Specifies the forced
charge/discharge control
mode.

Stop

Charge power

Discharge power
Forcible chg/dis pwr (W)
Specifies the forced
charge/discharge power.
[Negative maximum
discharge power, maximum
charge power]
Forcible chg/dis time (mins)
Specifies the forced
charge/discharge duration.
[0, 1440]
Remaining charge/discharge
time (mins)
Displays the remaining
charge/discharge time. This
Parameter cannot be set.
[0, 1440]
----End
Feed Power into Grid
Step 1 On the Operation console screen, choose Device maintenance > Energy control > Energy
storage control > Feed Power into Grid and perform the corresponding operation.