HuddleCamHD SimplTrack Lite - Huddlecamhd VISCA Command List

22
Rev 1.0 9/21
HuddleCamHD VISCA Command List
Part 1: Camera Issued Messages
ACK / Completion Messages
Command
Function
Command Packet
Comments
ACK / Completion
Messages
ACK
z0 4y FF
(y: Socket No.)
Returned when the command is accepted.
Completion
z0 5y FF
(y: Socket No.)
Returned when the command has been executed.
Error Messages
Command
Function
Command Packet
Comments
Error Messages
Syntax Error
z0 60 02 FF
Returned when the command format is different or
when a command with illegal command parameters is
accepted.
Command Buffer Full
z0 60 03 FF
Indicates that two sockets are already being used
(executing two commands) and the command could not
be accepted when received
Command Canceled
z0 6y 04 FF
(y: Socket No.)
Returned when a command which is being executed in a
socket specified by the cancel command is canceled. The
completion message for the command is not returned.
No Socket
z0 6y 05 FF
(y: Socket No.)
Returned when no command is executed in a socket
specified nu the cancel command, or when an invalid
Socket No. is specified.
Command Not Executable
z0 6y 41 FF
(y: Execution command
Socket No. Inquiry
command: 0)
Returned when a command cannot be executed due to
current conditions. For example: when commands
controlling the focus manually are received during auto
focus mode.
z = Camera Address + 8