Workflow Settings
• Location Barcode - Enter/scan the barcode to be
used for Location Scanning.
• Location Barcode Scan Timeout - The amount
of time before the Location Barcode Scan is cleared
after inactivity.
• Clear Removed Drawer Labels After XX Days - If
a Drawer is not used for the set number of days, it
will be cleared from the database.
User and Password Settings
• Temporary Users Expire After XX Days - This
value is used when creating temporary users. It sets
the Account Expiration date for the set number of
days ahead of the date you are created.
• Default User Group for Temporary Users - Sets
the default User Group the Temporary user will be
assigned when created.
• Passwords Expire After XX Days - Sets how
often to force password changes. Set to “0” (zero)
to disable forced password changes
• Lockout Inactive Users After XX Days - Sets how
long a User can be inactive before their account is
disabled. Set to “0” (zero) to disable auto-lockout.
• Remind Users to Change Password - Number of
days to warn Users to change password before it
expires.
• Password Minimum Length - Sets the password
length rule.
• Alpha and Numeric Characters - Sets the
password rule to require both alpha and numeric
characters.
• An Upper-Case Letter - Sets the password rule to
require an upper-case letter.
Integration Settings
• Enable Active Directory Integration - Check
this setting to enable Active Directory. With active
directory enabled and configured, the login will use
their windows login.
• Active Directory Server - Path for the Active
Directory Server.
• Enable Single Sign On - With this setting enabled and
Active Directory Setup, you will be automatically logged
in when opening MedLink™.
• Enable HL7 Integration - With HL7 integration
enabled and configured Patient, Room, Groups and
Department information will be received. When HL7 is
disabled, the Rooms and Patient Labels buttons will be
disabled on the Configuration menu.
• Patient Identification - When HL7 is enabled, this
setting specifies which Patient identifier to display within
the GUI, for example of Drawer labels. Choose the option
that is right for your facility.
Localization Settings
• Language - Sets the programs language.
• Date Format - Choose the date format for display.
ADT Feed Settings
• ADT deed refresh frequency - Sets the frequency of
how often the system checks for new information from
the ADT feed. Minimum time: 60 seconds.
26
Return to Table of Contents
To Next Page
Loading...
