Service and Maintenance
. . . 322
4. Pull the bulb socket out and
replace it with a new one.
5. Connect the electrical
connector to the new bulb
socket.
6. Reinstall the bulb socket and
turn it clockwise to secure it.
Headlight aiming is important to
safe driving. See your dealer for
service.
Taillights, Stoplights, Back-up
Lights and Rear Turn Signals
1. Open the tailgate.
2. Remove the two screws from
the light assembly.
3. Pull the light assembly away
from the vehicle.
4. Turn the bulb socket
counterclockwise to remove it.
5. Pull the bulb out of the socket.
04AKENG59_H3T.fm Page 322 Thursday, July 31, 2008 12:07 PM
To Next Page
Loading...
Need help?
General
