Instrumentation and Controls
. . . 26
INSTRUMENT CLUSTER
The instrument cluster shown is
typical. Your actual cluster may
vary depending on the particular
options included in your vehicle.
The instrument cluster is designed
to let you know at a glance how
your vehicle is running.
For information about the various
warning lights located on your
instrument cluster or elsewhere in
your vehicle, see "Warning Lights"
later in this section.
1. High Beam Indicator
The indicator light turns on
when the headlights are set to
high beams.
2. Turn Signal Indicators
An arrow will flash in the
direction of the turn or lane
change when the turn signal is
activated.
3. Engine Coolant Temperature
Gage
This gage shows the engine
coolant temperature. If the
pointer moves into the shaded
warning area, the engine is too
hot!
If the engine coolant has over-
heated, stop the vehicle and
turn the engine off immediate-
ly. See Sections 4 and 5 for
more information on your ve-
hicle's cooling system.
04AKENG59_H3T.fm Page 26 Thursday, July 31, 2008 12:07 PM
To Next Page
Loading...
Need help?
General
