Name: Humminbird HELIX CHIRP GPS G2N
Brand: Humminbird
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Check Accessory Connections

If you’ve connected other separate-purchase equipment to the control head, such as AIS, Compass/Heading Sensor, and more, use

these instructions to conﬁrm the equipment is detected and communicating with the control head. You can also check Ethernet

accessory connections from this view.

1. Press and hold the VIEW key.

2. Select System > Accessory Test.

Conﬁrm all accessories are listed as Connected. If you have a temp/speed wheel, the wheel must move for it to be detected.

Unconnected: If an accessory is listed as Unconnected, check the cable and power connections to conﬁrm they are secure

and powered on. Review the installation guide that was included with your accessory to conﬁrm it is installed correctly.

To change the NMEA 2000 network, see Set Up a NMEA 2000 Network.

Conﬁrming Accessories are Detected (HELIX 9 CHIRP SI GPS G2N)

connected

unconnected

(not detected

by the control

head)

NOTE: The menus for installed accessories are typically included in the Accessory tab in the Main Menu. See your accessory guide

for details. For the latest list of accessories that are compatible with your control head, visit our Web site at humminbird.com.

Getting Started

Questions and Answers:

Need help?

Do you have a question about the Humminbird HELIX CHIRP GPS G2N and is the answer not in the manual?

Humminbird HELIX CHIRP GPS G2N Specifications

General