Name: Humminbird HELIX CHIRP GPS G2N
Brand: Humminbird
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Getting Started

Check GPS Reception

If your control head includes internal GPS, or if it is connected to an External GPS receiver, use the instructions in this section to

conﬁrm the control head has GPS reception.

1. Press and hold the VIEW key.

2. Select System > GPS Diagnostic View.

Conﬁrm GPS Fix Type is shown as Enhanced or 3D.

Conﬁrm that the latitude/longitude position readout is displayed.

Reviewing GPS Reception

active satellite signal strength (yellow)

ﬁx type shown as

enhanced

latitude/longitude

position

monitored satellite

signal strength

(gray)

GPS Reception: The sky chart displays the satellite number and signal strength bar.

GPS Fix Type: reported as No Fix, 2D Fix, 3D Fix, or Enhanced. An Enhanced Fix has been augmented using information from

WAAS, EGNOS, or MSAS.

HDOP (the Horizontal Dilution of Precision): a GPS system parameter which depends on the current satellite conﬁguration.

HDOP is used to calculate the Estimated Position Error.

NOTE: To manually change your GPS source, change the output frequency, or turn on GLONASS, see Manage your Control Head.

Questions and Answers:

Need help?

Do you have a question about the Humminbird HELIX CHIRP GPS G2N and is the answer not in the manual?

Humminbird HELIX CHIRP GPS G2N Specifications

General