Troubleshooting
Problem Possible Cause Resolution
Excessive vibration Material obstructing propeller Remove material from propel
-
ler, shaft, or rudder by reversing
engines. If necessary, stop engines
and cut or pull material away.
Bent prop or shaft Replace propeller. If vibration con-
tinues, see your dealer for service.
Excessive play in shaft seal Check shaft seal for wear. Avoid
sudden torque changes. See your
dealer for repairs.
Bent rudder Replace. See your dealer for ser-
vice.
Poor performance Material wrapped around propeller Run engines in reverse. If neces-
sary, stop engines and cut or pull
material away.
Damaged propeller. Wrong propeller
in use.
Replace propeller
Underwater Gear
6.8
To Next Page
Loading...
