Waste and Sanitation Systems
10.8
Troubleshooting
Problem Cause Solution
Electric Head Not Flushing Head breaker Off
Battery Charge Low
Switch Breaker to on. If Breaker is
tripped determine cause and correct.
Charge Batteries
Head Not Emptying Blocked line to tank Remove material from line
Shower Sump Overflowing Sump Pump Breaker OFF
Discharge line blocked
Pinched Line
Defective Pump
Switch Breaker to on. If Breaker is
tripped determine cause and correct.
Clear material from line
Straighten line
Replace Pump (See your dealer for
service)
To Next Page
Loading...
