Introduction
1.4
industry and assists manufacturers, boat dealers, marinas,
repair yards and component suppliers in areas of legisla-
tion, environmental concerns, marine business growth,
and state and federal government agency interaction.
The third party certification that Marlow-Hunter partici-
pates in, uses well known Standards and Recommended
Practices of the ABYC, American Boat and Yacht Council.
We at Marlow-Hunter participate extensively in the
ABYC, which is all non-profit, and develops and pub-
lishes voluntary standards and recommended prac-
tices for boat on equipment design, construction, ser-
vice and repair. We utilize all applicable ABYC stan-
dards in the construction of Marlow-Hunter boats.
Finally Marlow-Hunter sells their products worldwide,
and, as such, must conform to the various rules and
regulations required by other countries. Most notably
are the European ISO (International Organization for
Standardization) standards which require the application
of the CE (Common European) mark. This mark, much
like the NMMA certification here in the U.S., gives you,
the boat owner, specific information concerning your boat.
1.9 Service, Parts and Repair
When your boat needs service, parts, or repair, contact
your dealer or Marlow-Hunter at www.marlow-hunter.com
to find a service/parts location. To locate repair and parts
facilities for the OEM equipment installed on your boat,
refer to the respective OEM manual for that component.
To Next Page
Loading...
