Water Systems
9.7
Troubleshooting
Problem Cause Solution
Air in system
Tank empty Fill water tank
Fresh water pumps cycle on and off Tank empty
Blocked or pinched water lines
Loose electrical connections
Defective pumps
Leak in system
Refill
Clear obstruction or straighten line
Check connections. Tighten as
needed
See your dealer for service
Repair leak. See your service dealer
for repairs
Low water pressure at all sinks and
showers
Defective pump See your dealer for service
Low water pressure at one sink Pinched water line Straighten line
No hot water (AC Power) Water heater breaker OFF Switch breaker to ON
To Next Page
Loading...
