Solar Sync Delay for X-CORE
The delay feature is accessible only aer the installation
of the Solar Sync. The Solar Sync Delay feature allows the user to
postpone seasonal adjustment changes from being made
by Solar Sync for up to 99 days.
While the Solar Sync Delay is active, the Solar Sync will continue to
collect and store data.
Operation:
To access the Solar Sync Delay setting:
1. Place the dial in the RUN position; press and hold the
button,
rotate the dial to the Solar Sync position then release the
button. The following screen will be presented: d:XX (where d
indicates days and XX indicates the number of days
to be delayed).
2. Press the or button to increase/decrease the number
of days the delay should run. Once the desired number of days
is displayed, move the dial back to the RUN position to activate
the delay.
To change the existing Delay days setting:
1. Open the Solar Sync Delay menu by pressing the
button and
rotating the dial to Solar Sync Settings and release the
button.
2. Use the + or - keys to modify the number of days until desired
numbers of delay days is displayed. (Setting the days to 00 turns
Solar Sync Delay to OFF.)
3. Return the dial to the RUN position for the changes to
take eect.
While Solar Sync Delay is active, the Solar Sync will continue
to gather weather information and calculate the Seasonal
Adjust Value. The updated seasonal adjust will be applied once the
Solar Sync Delay days reach 00.
NOTE: The number of days remaining will not be
displayed on the RUN screen. To check if the Delay
feature is active, open the Solar Sync Delay menu
and check the days displayed. If 1 or more days are
displayed, then Solar Sync Delay is active, if 00 is
displayed, then Solar Sync Delay is not active.
SOLAR SYNC DELAY FEATURE
18
To Next Page
Loading...
Need help?
General
