HunterDouglas PowerView User Manual

INSTALLATION
13
■
Inside/End Mount. Use your marks to position each bracket and mark each of the
screw holes.
➤
The minimum mounting depth required and fully recessed depth is 4
1
⁄ 8 ".
■
Drill the screw holes using a
1
⁄ 8 " drill bit.
■
Attach the installation brackets using the screws provided.
➤
End Mount Shims (Optional). To ensure light gap is even on both sides, you may
need to shim the bracket. Do not tighten the screws fully. Orient the shim as shown.
Slide the in between the bracket and window casement. Tighten the screws fully.
WARNING: Product is heavy. Mount into wood/metal studs or into concrete
with concrete anchors. Drywall anchors are not recommended.
Proceed to “STEP 2 — Install the Shade” on page 15.
Shim
(Optional)

HunterDouglas PowerView Specifications

General

Power Source	Battery
Type	Remote Control
Technology	Radio Frequency (RF)
Battery Type	CR2032
Compatibility	Hunter Douglas motorized shades and blinds
Connectivity	RF
Buttons	Multiple
Dimensions	Varies by model
Weight	Varies by model