3. Only for GARDENA
®
, Flymo
®
and McCULLOCH
®
,
lift up the frame.
4. Only for McCULLOCH
®
, remove the cap by pushing
the clips with a screwdriver.
5. Remove the hatch by using a flat screwdriver.
6. Detach it on one side and then pull it out by hand.
Note: The springs for the hatch differ between the
models. GARDENA
®
, Flymo
®
and Husqvarna
®
have
two springs. McCULLOCH
®
has one spring with
sleeve.
7. Locate the 4 positions where the body system is
attached.
8. Push the special tool down in 1 of the 4 positions,
and pull the body up.
1413 - 003 - 17.01.2022 Repair instructions - 17
To Next Page
Loading...
