• Operate the product remotely around the
boundary of the work area. Put set points on
the map in the app. Put 2 set points for a
straight line and a number of set points for
smooth curves.
• The position of the set point is approximately
in the center of the blade disc.
• Keep a distance of 10 cm / 4 in. between the
front and side of the product and obstacles
that are more than 5 cm / 2 in. high. when
you add a set point.
• Keep a distance of 5 cm / 2 in. between the
front and side of the product and obstacles
that are 1-5 cm / 0.4-2 in. high when you
add a set point.
• Put the product to straddle the edge
between the lawn and the stone path when
you add a set point if it is less than 1 cm /
0.4 in. high.
20
- Installation
1460 - 002 - 06.04.2020
To Next Page
Loading...
