Husqvarna P 525D - Belt System Maintenance; Muffler, Brake, and Filter Maintenance

22 – English
Propulsion
PROPULSION
12
11
4
6
7
8
10
3
13
2
5
1
9
8095-244
1. Intake
2. Engine
3. Hydraulic pump drive shaft
4. PTO belts
5. Hydraulic belt coupling
6. Drive shaft belt pulley
7. Solenoid clutch
8. Drive shaft (PTO shaft)
9. Spline joint to propeller shaft
10. Belt pulley cradle
11. Engine cradle
12. Wheels
13. Exhaust system
Air Filter, Dismantling and Assembly
Tools Dimension Quantity
Socket wrench 7 mm 1
Combination
wrench
13 mm
1. Loosen the hose clip for the air lter (1).
2. Extract the intake (2) from the back plate.
3. Loosen the fastening bolts (3) a few turns and
dismantle the air lter.
4. Install in reverse order.
8095-293
3
1
2
1. Hose clip
2. Intake
3. Mounting bolts