Husqvarna P 525D - STARTING ENGINE; Pre-Start Procedures and Checks; Engine Starting and Warm-up; Cold Weather Starting and Fuel

16 – English
Changing Joint Bearing in Articulated Unit
1
2
3
4
5
8095-268
1. Connecting rod
2. Joint bearing
3. Control cylinder
4. Link stay
5. Rear transmission
Chassis
Tools Dimension Quantity
Combination
wrench
13 mm 1
Combination
wrench
15 mm 1
Combination
wrench
16 mm 1
Combination
wrench
22 mm 1
Combination
wrench
27 mm 2
Combination
wrench
32 mm 2
Socket wrench 15 mm 1
Socket wrench 17 mm 1
Socket wrench 19 mm 1
Circlip pliers SGH 1
Chisel 1
Torque wrench 1
Ring end for
torque wrench
17 mm 1
WARNING!
Heavy objects are released when
dismantling the lift arms.
WARNING!
Never insert hands or fingers as
heavy components are unstably
supported. Use tools that reach.
Risk of crush injuries.