English – 45
Hydraulic System
Suction Filter, Changing
Tools Dimension Quantity
Socket wrench 8 mm 1
Torque wrench 1
U-grip for
torque wrench
32 mm 1
Tilt the seat back.
Release the hydraulic line (1) from its connection
to the tank (3).
Remove the screws (2) and lift up the connection.
Remove the suction filter (5) from its connection.
Wash the parts with white spirit and blow clean with
compressed air inside and out.
Fit a new suction filter on the connection. Torque,
60 Nm.
Assemble in the reverse order. Use a new gasket.
Tighten the nuts moderately so the gaskets are not
damaged.
2
6
4
1
3
5
8095-226
1. Hydraulic hose
2. Screw
3. Tank connection
4. Adapter
5. Suction filter
6. Gasket
To Next Page
Loading...
