38 – English
Electrical System
Battery, Changing
Tools Dimension Quantity
Combination
wrench
10 mm 1
Combination
wrench
13 mm 1
Socket wrench 10 mm 1
1. Loosen the hose clip for the air lter (1).
2. Extract the intake (2) from the back plate.
3. Loosen the fastening bolts (3) a few turns and
dismantle the air lter.
4. Loosen the negative terminal cable lug.
8095-293
3
1
2
1. Hose clip
2. Intake
3. Mounting bolts
IMPORTANT!
Hold the bolts so that the battery terminals are not
put under strain.
5. Loosen and lift off the positive terminal cable lug
(1), which is located under the fuse holder.
6. Dismantle the battery bridge (2) with two screws.
7. Lift up the battery (3).
8. Connect a new battery in reverse order.
8095-279
2
3
1
1. Positive terminal cable
holder
2. Battery bridge
3. Battery
To Next Page
Loading...
