Husqvarna TE 300i User Manual

28 LIST OF SYMBOLS
158
28.1 Red symbols
Red symbols indicate an error condition that requires immediate intervention.
The oil level warning lamp lights up red – Oil level has reached the MINmarking. Ride for no
more than until the remaining fuel in the tank is depleted and at the next opportunity refuel
with 2-stroke oil.
28.2 Yellow and orange symbols
Yellow and orange symbols indicate an error condition that requires prompt intervention. Active driving aids are
also represented by yellow or orange symbols.
Malfunction indicator lamp lights up/flashes yellow – The OBD has detected an error in the
vehicle electronics. Come safely to a halt, and contact an authorized Husqvarna Motorcy-
cles workshop.
The fuel level warning lamp lights up yellow – The fuel level has reached the reserve mark.
28.3 Green and blue symbols
Green and blue symbols reflect information.
Turn signal indicator lamp flashes green – The turn signal is switched on.
The high beam indicator lamp lights up blue – The high beam is switched on.

Husqvarna TE 300i Specifications

General

Engine Type	Single cylinder, 2-stroke
Displacement	293.2 cc
Bore x Stroke	72 mm x 72 mm
Fuel System	Electronic Fuel Injection
Starter	Electric starter
Transmission	6-speed
Cooling System	Liquid cooled
Front Suspension	WP XPLOR-USD, Ø 48 mm
Front Brake	260 mm disc
Rear Brake	220 mm disc
Fuel Capacity	9 L
Seat Height	950 mm
Ground Clearance	370 mm