Husqvarna TE 300i User Manual

12 SERVICE WORK ON THE CHASSIS
65
12.16 Removing the shock absorber
Preparatory work
– Raise the motorcycle with a lift stand. ( p. 56)
V00902-10
Main work
– Remove the cable ties.
–
Remove screws
1
.
–
Remove screws
2
with the washers.
– Remove the frame protectors on the left and right.
F00284-10
–
Remove screw
3
.
–
Remove fitting
4
.
Info
Raise the wheel slightly to be able to remove the
screws more easily.
F00285-10
–
Press angle lever
5
toward the rear.
–
Press linkage lever
6
downward.
V00940-10
(All EU models)
– Remove the cable tie and rubber band.
– Separate plug-in connector of the brake light switch.

Husqvarna TE 300i Specifications

General

Engine Type	Single cylinder, 2-stroke
Displacement	293.2 cc
Bore x Stroke	72 mm x 72 mm
Fuel System	Electronic Fuel Injection
Starter	Electric starter
Transmission	6-speed
Cooling System	Liquid cooled
Front Suspension	WP XPLOR-USD, Ø 48 mm
Front Brake	260 mm disc
Rear Brake	220 mm disc
Fuel Capacity	9 L
Seat Height	950 mm
Ground Clearance	370 mm