6 CONTROLS
19
6.9 Turn signal switch (All EU models)
K00926-10
The turn signal switch
1
is fitted on the left side of the handle-
bar.
Possible states
Turn signal light off – The turn signal switch is in the
central position.
Left turn signal on – The turn signal switch is turned
to the left.
Right turn signal on – The turn signal switch is turned
to the right.
6.10 Electric starter button
K00927-10
The electric starter button
1
is fitted on the right side of the
handlebar.
Possible states
• Electric starter button in basic position
• Electric starter button is pressed – In this position, the
electric starter is actuated.
6.11 Map switch
V00986-10
The map switch
1
is fitted on the right side of the handlebar.
Possible states
• Map switch in position I – The ignition timing map Perfor-
mance is active in this position.
• Map switch in position II – The ignition timing map Soft is
active in this position.
The engine characteristic can be altered with the map switch.
Info
The map switch has no function in the homologated
(restricted) condition of the motorcycle.
6.12 Indicator lamps overview (All EU models)
V00924-01
Possible states
Turn signal indicator lamp flashes green – The turn
signal is switched on.
The high beam indicator lamp lights up blue – The
high beam is switched on.
Malfunction indicator lamp lights up/flashes yellow
– The OBD has detected an error in the vehicle elec-
tronics. Come safely to a halt, and contact an autho-
rized Husqvarna Motorcycles workshop.
To Next Page
Loading...
Need help?
General
