HUST CNC H6D-B3 MANUAL
7
(11) Graph delete（Del.-Graph）
After pushing this function key, can delete the figure of all Graph for reference
of procedure.
(12) RET：BACK TO AUTO MODE
PS：
When the MCM setting value is 0, the program has no recycle and no DX. It ranges
from 0 to 10.
Ex : Function setting（Vice）
Value 1: The program will execute first motion by the MCM-setting page.
Value 2: The program will execute second motion by the MCM-setting page.
ETC…
To Next Page
Loading...