8--4
105
Use and maintenance manual S20DSP
Oil for lubricant/coolant fluid
The oil used for the machine lubricant/coolant fluid is CASTROL Syntolin TFX.
Though there are no specific standards for these types of oils, Hyd---Mech
considers that the above product has the best price/quality rapport. The following
oils can also be said to have similar characteristics and are therefore compatible:
A G I P N B 2 0 0 --- S H E L L L u t e m T T --- I P U t e n s F l u i d --- F
Finally, a lubricant/coolant guaranteed and distributed by a band saw manufactu-
rer (LENOX) is BAND---ADE SAWING FLUID LENOX.
--- tank capacity Lt. 80
--- oil concentration 5---6 %
To Next Page
Loading...