3--9
19
Safety and accident prevention
Vibration emission
This sawing machine complies with the norms EN1299 and EN1033, as the
machine vibration emission on the devices controlled by the operator does not
exceed the threshold of 2.5 m/s
2
Electromagnetic compatibility
As from 1 January 1996 all electrical and electronic appliances bearing the CE
marking that are sold on the European market must conform to Directive
89/336/EEC and 70/23/CEE and 98/37/CEE. The prescriptions regard two specific
aspects in parti cular:
1. “EMISSIONS: during its operation, the appliance or system must not emit spurious
electromagnetic signals of such magnitude as to contaminate the surrounding
elect romagnetic environment beyond clearly prescribed limits”;
2. “IMMUNITY: the appliance or system must be able to operate correctly even when
it is placed in an electromagnetic environment that is contaminated by disturbances
of defined magnitude”.
The following text contains a list of the applied standards and the results of the
electromagnetic compatibility testing of machine model S20DSP; Test report no.
140201.
Product family standards
H CEI EN 55011 (1999) Industrial, scientific, and medical radio frequency appliances
(ISM). Characteristics of radio frequency disturbance -- Limits and methods of
measurement.
H CEI EN 50370--2 (2004): Electromagnetic Compatibility (EMC) -- P roduct family
for machine tools -- Part 2: Immunity.
Basic standards
H EN 61000--4-- 2 + A1 + A2 (1996 --1999--2001) Electromagnetic Compatibility
(EMC) -- Part 4: Test and measurement techniques -- Section 2: Electrostatic di-
scharge immunity tests -- Basic publication.
H EN 61000--4-- 3 + A1 + A2 (2003 -- 1999 -- 2001): Electromagnetic Compatibility
(EMC) Part 4: Test and measurement techniques -- Section 3: Radiated, radio-- fre-
quency, electromagnetic field immunity test.
H EN 61000--4-- 4 + A1 + A2 (1996 -- 2001 -- 2002) Electromagnetic Compatibility
(EMC) -- Part 4: Test and measurement techniques -- Section 4: Fast transients/
bursts immunity tests -- Basic publication.
H EN 61000--4--5 + A1 (1995 -- 2001): Electromagnetic Compatibility (EMC) -- Part
4: Test and measurement techniques -- Section 5: Surge immunity test.
H EN 61000--4--6 + A1 (1997 -- 2001) Electromagnetic Compatibility (EMC) -- Part
4: Test and measurement techniques -- Section 6: Immunity to conducted interfe-
rence, induced by radio frequency fields.
H EN 61000--4--11 + A1 (1995 -- 2001): Compatibilità Elettromagnetica (EMC) Part
4: Test and measurement techniques -- Section 11: Voltage dips, short interruptions
and voltage variations immunity tests.
To Next Page
Loading...
General