2--4
8
Use and maintenance manual S20DSP
Turntable
Made from a fusion of cast iron it makes up the fulcrum of the cutting band. By
releasing the blocking lever on the fixed platform right and left rotation of the
bow is consented.
Fixed platform
It is made up of two parts, upper and lower, which close the rotating and platform
and support the cutting surface in interchangeable steel.
The lower part is the resting base of the rotating platform, cutting surface and
vice. It is free to run transversely on linear guides and slides with re---circulation
of pre---loaded spheres. It is integral to the base and the rear part has the
reference strokes for 60˚ left and 60˚ right cuts.
To Next Page
Loading...