General Information: 1-10
Distributor’s Responsibility
Acceptance of Shipment
Before accepting the truckmount, check the following:
1. The truckmount should be free from any damage during shipping. Do not sign the
delivery receipt until you have closely inspected the truckmount and noted any
damage on the delivery receipt. Hidden damage may be present even if the box
looks okay. It is recommended that the box be opened before you sign for the
shipment.
2. Check the packing list and verify that all items are accounted for.
Installation Responsibilities
• Ensure proper payload capacity. It is the distributor’s responsibility to verify that the
equipment package does not exceed the vehicle capacity.
• Ensure installation of a safe fuel tap system and through-oor ttings as provided by
HydraMaster.
• Ensure proper placement of the truckmount, recovery tank, fresh water tank, and
accessories in the vehicle, and check that they are secured with bolts and back up
plates. The distributor should verify that the owner is in agreement with the layout.
• Ensure proper connection of the fuel lines.
• Ensure proper connection and installation of the battery. Verify that the battery is in
accordance with HydraMaster’s recommendation.
• Check the pump, vacuum blower and engine oil levels prior to starting the truckmount.
• Start and run the truckmount and check that all systems function properly.
• Test all hoses, wands and other accessories for correct operation.
• Ensure timely return of the document package.
To Next Page
Loading...
