1-9: General Information
RESPONSIBILITIES
Purchaser’s Responsibilities
• Prior to purchasing a van, ensure that the payload is suitable for all of the equipment
that will be installed and transported. This includes and is not limited to: the truckmount,
recovery tanks, fresh water tanks and any other on-board water hose reels, hoses,
cleaning tools, chemicals and drying equipment. Payload capacity information is
available through the auto dealer, the manufacturer’s web site, and is also located on
the door pillar of the driver’s side door.
• Purchase a heavy duty Group 24 (500+ CC Amps) battery for this truckmount. This is
normally available from the installation dealer.
• Prior to dropping your van off at the distributor for the truckmount to be installed, have
a spray-on bed liner applied to the oor such as Rhino Lining® or Line-X®.
Plywood and carpet are not recommended.
• Prior to operating the truckmount, read this manual in its entirety and familiarize
yourself with the information contained here. Special attention should be paid to all
Warnings and Cautions.
• The distributor is responsible for the correct installation of the truckmount. The
distributor is also responsible to train you in the correct and proper operation and
maintenance of the truckmount.
Any modication of the truckmount may void the warranty.
To Next Page
Loading...
