HydraMaster GTXR+ - Page 36

3-7: Cleaning Information
Rotary Tools
HydraMaster’s selection of Rotary Extraction Tools includes
the RX-15H and the RX-20
®
.
RX-15H Hard Surface Cleaning Tool
The RX-15H can be used to clean tile, concrete and stone
oors.
Select the appropriate pre-spray and apply to the oor.
Usually, a 5 minute or less dwell time is ideal. Excessive
dwell time may actually retard the cleaning process by
soaking in deeper and requiring more drying time before
sealing.
Avoid letting the pre- spray dry on the oor by extracting it
within the 5 minute time frame.
Recommended pressure is 700 to 1,500 psi, and
recommended temperature is up to 200 degrees F.
It is usually easiest to move at a moderate rate forward
and backward. You need only overlap enough to assure
complete coverage.
Moving the RX-15H too fast will create a spiral pattern in the grout or tile. Slow down so
this pattern does not occur.
21800.426.1301 www.hydramaster.com
. High temperature,
.