Hypertherm HyPrecision Predictive P-50S User Manual

50 HyPrecision Predictive waterjet pump Operator Manual 810120
2 – Product description
Product description
Hydraulic fluid filter
This filter removes contamination from the hydraulic fluid.
Water manifold
Boost pump pressure regulator
This knob lets the user adjust boost pump pressure.
Supply cutting water solenoid
The solenoid controls the cutting water coming into the system.
Low-pressure water dump valve
The valve closes to maintain water pressure while cutting. It opens to release pressure when the pump turns off.
Bleed-down valve solenoid
This solenoid opens and closes the bleed-down valve.
Low water-pressure transducer
The transducer monitors the manifold water pressure.
Low-pressure water relief valve
The relief valve prevents water in the system from being too high. When the valve opens, water goes to the drain.
1
3
5
2
6
4
1
Boost pump pressure regulator
2
Supply cutting water solenoid
3
Low-pressure transducer
4
Bleed-down valve solenoid
5
Low water-pressure water dump valve
6
Low-pressure water relief valve

Hypertherm HyPrecision Predictive P-50S Specifications

General

Brand	Hypertherm
Model	HyPrecision Predictive P-50S
Category	Water Pump
Language	English