M
AINTENANCE
/P
ARTS
5-7
Operator Manual
TECHNICAL QUESTIONS
If you are unable to fix the problem with your Powermax1100 by following this basic troubleshooting
guide or if you need further assistance:
1. Call your distributor. He will be able to help you, or refer you to an authorized Hypertherm repair
facility.
2. Call the nearest Hypertherm office, listed in the front of this manual.
3. See the Powermax1100 service manual for wiring diagrams, higher level troubleshooting and
more parts list information.
11. The torch cuts poorly.
Problem
Cause
/ Solution
11.1 Power supply voltage links are incorrect.
See voltage configuration settings in
Section 3.
11.2 Torch consumables are worn.
See
Operating Tips
in Section 4.
11.3
Line voltage is too low.
See Cause/Solution 3.2.
To Next Page
Loading...
Need help?
General
