Operator Manual
5-12
M
AINTENANCE
/P
ARTS
Powermax1100 Field Upgrade Kits and Optional Parts
Part Number Description
028714 ...................................On/Off Pendant with Lead, 25 ft (7.6 m) (Also comes standard with most
machine torch system configurations.)
128061 ...................................On/Off Pendant with Lead, 50 ft (15.2 m)
128062 ...................................On/Off Pendant with Lead, 75 ft (23 m)
128142 ...................................Kit: Wheels, Powermax1100
128143 ...................................Kit: Pilot Arc Controller, Powermax1100
128144 ...................................Kit: Machine Interface, Powermax1100, 208/240/480V
128168 ...................................Kit: Machine Interface, Powermax1100, 200/230/400V
128169 ...................................Kit: Machine Interface, Powermax1100, 230/400V CE
128145 ...................................Kit: Work Cable, 50 ft (15.2 m), Powermax1100
128146 ...................................Kit: Cooling Air Filter, Powermax1100
128147 ...................................Kit: 600V Conversion, Powermax1100
011079 ...................................Filter Element: Gas Supply Filter
129146 ...................................Jumper: Powermax1100 Link Box
023206 ...................................Cable: Machine Interface, 25 ft (7.6 m) (Comes standard with machine torch
system configurations and with machine interface kits.)
109068 ...................................Toroid for power cord ground, Powermax1100 (CE power supplies only)
002282 ...................................Strain Relief Sleeve: 0.875
002283 ...................................Strain Relief Sleeve: 0.750
002286 ...................................Strain Relief Sleeve: 0,625 - Shipped in CE power supply rear panels
Note: Field upgrade kits must be installed by qualified service personnel.
POWER SUPPLIES - 208/240/480V, 1φ/3φ, 50/60 HZ
Part For With Pilot Arc With Machine
Number Torch Type Control Interface
085000 Hand No No
085012 Hand Yes No
085013 Machine No Yes
085014 Machine Yes Yes
POWER SUPPLIES - 200/230/400V, 1φ/3φ, 50/60 HZ
Part For With Pilot Arc With Machine
Number Torch Type Control Interface
085002 Hand No No
085034 Hand Yes No
085035 Machine No Yes
085036 Machine Yes Yes
POWER SUPPLIES - 230/400V CE, 3φ, 50-60 HZ
Part For With Pilot Arc With Machine
Number Torch Type Control Interface
085003 Hand No No
085023 Hand Yes No
085025 Machine No Yes
085024 Machine Yes Yes
Note: Contact your distributor or call the nearest Hypertherm office for hand and machine torch system configurations.
To Next Page
Loading...
Need help?
General
