Hypertherm Powermax30 AIR - Common Hand-Cutting Faults; Minimizing Dross

54 Powermax30 AIR Operator Manual 808840
5 – Maintenance and Troubleshooting
Every use:
Check the indicator lights and correct any fault
conditions.
Inspect the consumables for proper installation and
wear.
Every 3 months:
Replace any damaged labels. Inspect the trigger for damage. Inspect the torch body
for cracks and exposed wires. Replace any damaged
parts.
Inspect the power cord and plug.
Replace if damaged.
Inspect the torch lead. Replace if damaged.