Hypertherm Powermax30 AIR Operator's Manual

Powermax30 AIR Operator Manual 808840 53
Section 5
Maintenance and Troubleshooting
Perform routine maintenance
WARNING!
ELECTRIC SHOCK CAN KILL
Disconnect electrical power before performing any maintenance that
involves removing the cover from the power supply or the consumables from
the torch.
All work requiring removal of the power supply cover must be performed by
a qualified technician.
See the Safety and Compliance Manual (80669C) for more safety
precautions.

Hypertherm Powermax30 AIR Specifications

General

Built-in Air Compressor	Yes
Output Voltage	83 VDC
Input Voltage	120-240 V
Current Output	15–30 A
Cutting Thickness	Up to 10 mm (3/8 in) recommended cut
Gas Supply	Built-in air compressor
Operating Temperature	-10°C to +40°C (+14°F to +104°F)