Maintenance Schedule 8000 SRM 707
Table 1. Maintenance Schedule (Continued)
Item
No.
Item
8hr/
1day
250
hr/
6wk
500 hr/
3mo
1000
hr/
6mo
2000 hr/
1yr
Procedure or
Quantity
Specification
9
Engine Oil (Diesel)
Perkins 704-26
(UB)
X
CIL
C 8.3 liter (8.8 qt)
-15 to 40 C
(5 to 104
F)
SAE 10W-30
-10 to 50
C
(14 to 122
F)
SAE 15W-40
API CG4/CH4
ACEA E3/E5
MIL-PRF-2104G
6
Engine Oil Filter C
1
See NOTE 2
See Parts Manual
Fuel Filter, Diesel X C Clean or replace
See NOTE 3
See Parts Manual
Water Separator,
Diesel (Prefilter)
X
CIL
C Remove water
Clean or replace
See Parts Manual
12
Brake Fluid CIL X 0.2 liter (0.4 pt) SAE J-1703
23
Hydraulic Oil
H45-65XM
X X C See NOTE 4
35.0 liter
(37.0 qt)
API CC or CC/SE
18 C(0F) and
Above SAE 10W
23
Hydraulic Oil
S45-65XM
X X C See NOTE 4
34.0 liter
(36.0 qt)
API CC or CC/SE
18 C(0F) and
Above SAE 10W
X=Check C=Change L=Lubricate CIL=Check Indicator Light during operation
NOTE 1: Checkthefuelsystemforleakspriortoanyserviceormaintenanceactivity.
NOTE 2: Change filters on NEW lift trucks at first 100 hours on hourmeter.
NOTE 3: Very dirty conditions require daily clean and check.
NOTE 4: Heavy-duty or high-temperature operations require more frequent checks.
NOTE 5: Cooling indicator light is used only on S40-65XM lift truck models.
NOTE 6: In dirty or dusty environments, replace at 1000 hours.
NOTE 7: Perkins engine is to be at operating temperature of 82 ±1.5 C (180 ±35 F) when inspecting for low
idle setting.
NOTE 8: Multipurpose grease with 2 to 4% molybdenum disulfide.
NOTE 9: Mazda M4-2.0G and M4-2.2G 2004 or newer engines, check at 5000 hours or 7 years.
NOTE 10: Replace on Mazda M4-2.0G and M4-2.2G engines every 2500 hours. Use only hour interval.
NOTE 11: On Mazda M4-2.0G and M4-2.2G engines, replace the timing belt every 3500 hours. Use only the
hour interval.
NOTE 12: Perform maintenance as specified by the manufacturer.
6
To Next Page
Loading...
