Maintenance Schedule 8000 SRM 707
Table 1. Maintenance Schedule (Continued)
Item
No.
Item
8hr/
1day
250
hr/
6wk
500 hr/
3mo
1000
hr/
6mo
2000 hr/
1yr
Procedure or
Quantity
Specification
26
Fuel Injectors
Gasoline
X
1
See NOTE 9
Check and clean
if required
26
Fuel Injectors
Diesel
X
4
See Parts Manual
26
Fuel Injector (Aisan) X
1
See NOTE 9
Check and clean
if required
Pedals, Levers, Seat
Rails, Cables, Hinges,
Linkages, Hood Latch
L Lubricate as
necessary
Hyster Part No.
328388
17
Differential Oil
Powershift
Transmission
S45-65XM
X C 3.8 liter (4.0 qt) SAE 80W-90,
85W-140
17
Differential Oil
Powershift
Transmission
H45-65XM
X C 7.6 liter (8.0 qt) SAE 80W-90,
85W-140
21
Valve Adjustment
Mazda M4-2.0G
X Adjust as
required
0.30 mm (0.012 in.)
Cold
21
Valve Adjustment
Mazda M4-2.2G
X Adjust as
required
0.30 mm (0.012 in.)
Hot
X=Check C=Change L=Lubricate CIL=Check Indicator Light during operation
NOTE 1: Checkthefuelsystemforleakspriortoanyserviceormaintenanceactivity.
NOTE 2: Change filters on NEW lift trucks at first 100 hours on hourmeter.
NOTE 3: Very dirty conditions require daily clean and check.
NOTE 4: Heavy-duty or high-temperature operations require more frequent checks.
NOTE 5: Cooling indicator light is used only on S40-65XM lift truck models.
NOTE 6: In dirty or dusty environments, replace at 1000 hours.
NOTE 7: Perk
ins engine is to be at operating temperature of 82 ±1.5
C (180 ±35 F) when inspecting for low
idle settin
g.
NOTE 8: Multipurpose grease with 2 to 4% molybdenum disulfide.
NOTE 9: Mazda M4-2.0G and M4-2.2G 2004 or newer engines, check at 5000 hours or 7 years.
NOTE 10: Replace on Mazda M4-2.0G and M4-2.2G engines every 2500 hours. Use only hour interval.
NOTE 11: On Mazda M4-2.0G and M4-2.2G engines, replace the timing belt every 3500 hours. Use only the
hour interval.
NOTE 12: Perform maintenance as specified by the manufacturer.
14
To Next Page
Loading...
