Hytera DMR System Planner
100
2. Transmitting a call through Contact List or Call Logs
3. Transmitting a call through Manual Dial
Receiving and Responding to a Private Call
After a Private Call is received, you may hold down the PTT key within the preset
time period to call back. If you do not respond to it, your radio will provide
appropriate indications.
Group Call
Transmitting a Group Call
You may transmit a group call through any of the following methods.
1. Transmitting a call to the preset contact
2. Transmitting a call through Contact List
3. Transmitting a call through Manual Dial
Receiving and Responding to a Group Call
After a Group Call is received, you may hold down the PTT key within the preset
time period to call back. If you do not respond to it, the radio will display the missed
call icon. The indication information is the same as that for the Private Call.
All Call
Two methods are available for transmitting an All Call: transmitting a call to the
preset contact; transmitting a call through Contact List.
Receiving an All Call
When an All Call is received, your radio will display an indication icon.
Calls on Analog Channels
To transmit a call, hold down the PTT key and speak into the microphone. To receive,
release the PTT key.