FASTENER TYPE: Allows setting of left handed or right
handed threads and sets functions accordingly. Also of-
fers a setting for “HYTORC Nut” and “HYTORC Washer”.
DISPLAY POLARITY: Inverts the display color from
white to black (for better visibility in some lighting).
SHORTCUTS: Shows the button press shortcut combinations.
Options (Continued)
CYCLE COUNTER: Shows the number of completed,
failed, and total cycles.
CHANGE UNLOCK CODE:
Allows the user to change the
unlock code of the gun (this
code is required for entering
calibration mode and changing
either the upper or lower
torque limits). Changing some
features, such as calibration,
requires the use of an unlock
code. This function allows you
to change the code from the
default. The default code is 0.
25
BREAKTHROUGH PRODUCTS FOR INDUSTRIAL BOLTING
To Next Page
Loading...
Need help?
General
