MEMORY: Allows the user to save the
current gun parameters to a memory
location, or load gun parameters from
a memory location.
FW / HW VERSIONS: Shows the current hardware
and software versions of the gun.
CALIBRATION: Enters the calibration routine (see “Calibration
Section” of the manual).
Options (Continued)
ERROR LOG: A running list of the error codes generated
by the gun.
UPPER TORQUE LIMIT: The
default Unlock Code is 0 (to
change the unlock code see
“change unlock code” option
on page 26).
26
BREAKTHROUGH PRODUCTS FOR INDUSTRIAL BOLTING
To Next Page
Loading...
