44
Network Camera User Manual
Figure 6-4 Time Settings
2.
Select the Time Zone of your location from the drop-down menu.
3.
Configure the NTP settings.
(1)
Click to enable the NTP function.
(2)
Configure the following settings:
Server Address: IP address of NTP server.
NTP Port: Port of NTP server.
Interval: The time interval between the two synchronizing actions with NTP server.
(3)
(Optional) You can click the Test button to test the time synchronization function
via NTP server.
Figure 6-5 Time Sync by NTP Server
To Next Page
Loading...