66
Network Camera User Manual
4.
Click Save to save and exit the interface.
Note: A reboot is required for the settings to take effect.
7.1.4
Configuring Port Settings
Purpose:
You can set the port No. of the camera, e.g., HTTP port, RTSP port and HTTPS port.
Steps:
1.
Enter the Port Settings interface, Configuration > Network > Basic Settings > Port
Figure 7-7 Port Settings
2.
Set the HTTP port, RTSP port, HTTPS port and server port of the camera.
HTTP Port: The default port number is 80, and it can be changed to any port No. which
is not occupied.
RTSP Port: The default port number is 554 and it can be changed to any port No.
ranges from 1 to 65535.
HTTPS Port: The default port number is 443, and it can be changed to any port No.
which is not occupied.
Server Port: The default server port number is 8000, and it can be changed to any port
No. ranges from 2000 to 65535.
3.
Click Save to save the settings.
Note: A reboot is required for the settings to take effect.
To Next Page
Loading...