96
Network Camera User Manual
Note: The alignment adjustment is only applicable to Text Overlay items.
8.
Click Save to save the settings.
9.3
Configuring Privacy Mask
Purpose:
Privacy mask enables you to cover certain areas on the live video to prevent certain spots in
the surveillance area from being live viewed and recorded.
Steps:
1.
Enter the Privacy Mask Settings interface: Configuration > Image > Privacy Mask.
2.
Check the checkbox of Enable Privacy Mask to enable this function.
3.
Click Draw Area.
Figure 9-7 Privacy Mask Settings
4.
Click and drag the mouse in the live video window to draw the mask area.
Note: You are allowed to draw up to 4 areas on the same image.
5.
Click Stop Drawing to finish drawing or click Clear All to clear all of the areas
To Next Page
Loading...