40
User Manual of Network Camera
Chapter 6 Network Camera
Configuration
6.1
Configuring Local Parameters
Purpose:
The local configuration refers to the parameters of the live view, record files and
captured pictures. The record files and captured pictures are the ones you record and
capture using the web browser and thus the saving paths of them are on the PC running
the browser.
Steps:
1.
Enter the Local Configuration interface: Configuration > Local.
Figure 6-1 Local Configuration Interface
2.
Configure the following settings:
Live View Parameters: Set the protocol type and live view performance.
Protocol Type: TCP, UDP, MULTICAST and HTTP are selectable.
TCP: Ensures complete delivery of streaming data and better video quality, yet
the real-time transmission will be affected.
UDP: Provides real-time audio and video streams.
To Next Page
Loading...