Fieldbus Communication
RCP6
Construction of Instruction Manual for Each Controller Model
and This Manual
This instruction manual is for the fields communication using RCP6S Gateway Unit, Hub Unit
and controllers for RCP6S Gateway.
For installation and how to attach conveyance objects, refer to instruction manual for each
actuator type.
RCP6S(W) RCP6S Gateway Controllers
Caution: In this manual shows the explanation of how to operate for when using the Fieldbus
communication.
Refer to provided separately for Serial Communication [Modbus] for operation in serial
communication.
* In this manual explanations “RCP6S GW” shows the “RCP6S Gateway”.
●Basic Specifications (Actuator type)
・Fieldbus Communication
RCP6S fieldbus communication (This manual)
ME0349
・Serial Communication Serial communication [Modbus] ME0162
Slider type RCP6S(CR)-SA ME3749
Wide slider type RCP6S(CR)-WSA ME3750
Rod type RCP6S-RA ME3751
Wide rod type RCP6S-WRA ME3752
Radial cylinder type RCP6S-RRA ME3753
Table type RCP6S-TA ME3754
Dust proof/Splush proof
Rod type RCP6SW-RA ME3759
Dust proof/Splush proof
Wide rod type RCP6SW-WRA ME3760
Dust proof/Splush proof
Radial cylinder type RCP6SW-RRA ME3761
Ì Extention Device
・Gateway unit
RCP6S fieldbus communication (This manual)
ME0349
・Hub unit
RCP6S fieldbus communication (This manual)
ME0349
・RCP6S Gateway Controllers
RCP6S fieldbus communication (This manual)
ME0349
・PLC connecting unit Serial communication [Modbus] ME0162
■Teaching Tool
・PC software PC software ME0155
・Teaching Pendant
TB-01 (Applicable for position controller) Touch panel teaching ME0324
TB-02 (Applicable for position controller) Touch panel teaching ME0355
TB-03 (Applicable for position controller) Touch panel teaching ME0376
To Next Page
Loading...
Need help?
General
