IAME Parilla MINI SWIFT - Crankshaft Servicing; Crankshaft Disassembly Process

MAN-045 ING
7
2 – CRANKSHAFT ASSEMBLY/DISASSEMBLY
ATTENTION:
THE DISASSEMBLY/ASSEMBLY OPERATIONS ON THE ENGINE CRANKSHAFT, MUST BE
PERFORMED ONLY BY AN AUTHORIZED SUPPORT CENTER USING THE SPECIALLY DESIGNED
TOOLS. USE OF UNFITTED TOOLS OR OPERATIONS PERFORMED BY UNSKILL PERSONNEL
MAY DAMAGE THE CRANKSHAFT BEYOND REPAIR.
TOOLS DESCRIPTION P.N.
CRANKSHAFT ASSEMBLY KIT 10110-C
CRANKPIN BUSH (IN 10110-C) 10150
CRANKSHAFT DISASSEMBLY KIT: 10100-C3
CRANKSHAFT SUPPORT 10100
CRANKSHAFT PLATE (60cc) 10103
CRANKSHAFT INSERT (60cc) 10108
CRANKPIN PUSHER 10107
2.1 – CRANKSHAFT DISASSEMBLY
OPERATIONS TOOLS
1.
PLACE THE DISASSEMBLY TOOL
(P.N. 10100-C3) UNDER THE PRESS.
- 5 MeT PRESS
- CRANKSHAFT DISASSEMBLY KIT
2.
PLACE THE CRANKSHAFT IN THE TOOL
INSERTING THE CRANKSHAFT PLATE
(P.N. 10103) BETWEEN THE CRANKSHAFT
HALVES (see Fig.1).
3.
INSERT THE CRANKSHAFT INSERT 60cc
(P.N. 10108) AND USING THE CRANKPIN
PUSHER (P.N. 10107) PRESS THE
CRANKPIN OUT (see Fig.2).
Fi
g
.1
Fi
g
.2