162
The display screen will again show:
I~EADY
This completes
the
BASIC checkout procedure.
o 10. Check
to
see
that
you
received all the items
on
the Contents Checklist.
If any
of
the
preceding items are missing, notify your
IBM
marketing
representative.
If
the words above
the
top
row
of
numeric keys are labeled
on
the
left with:
APL
BASIC
BASIC}
APL
COMM
f
BASIC
APL
,
you
have an APL machine
without
the
communications feature.
, you have a BASIC machine
without
the
communications feature.
,
you
have a combined machine.
, you have a combined machine with
the
communications feature.
COMM}
,
you
have an APL machine with the communications feature.
APL
COMM}
,
you
have a BASIC machine with the communications feature.
BASIC
If
you have
not
checked
out
APL on a combined machine, set the BASIC/APL
switch
to
the
APL position, press RESTART, and go
to
the APL checkout
procedure
in
Appendix A
of
the
IBM 5100 APL Reference Manual, SA21-9213.
If
you already did
the
APL checkout procedures, continue with step 11.
o 11. If
the
auxiliary tape unit
is
to
be installed, unpack the tape unit and proceed
to
the
Auxiliary
Tape
Unit
Setup Procedure which follows. After installing
the auxiliary tape unit, return
to
step 12.
o 12. If
the
printer
is
to
be installed, unpack the printer and proceed
to
the Printer
Setup Procedure
which comes later
in
this appendix. After installing
the
printer, return
to
step 13.
o 13. If
your
5100
is
equipped with any
other
feature, use the manual supplied
with
that
feature
to
set
up and check
out
the
feature, then return
to
step 14
in
this manual.
o 14. When
the
preceding devices
or
features are installed,
or
if none are, begin
reading
the
IBM
5100 BASIC Introduction
to
learn how
to
operate
your
5100.
/
./
.".
To Next Page
Loading...
